Stainless Steel High Speed Solid-Liquid Separating Flat Sediment Centrifuge

Stainless Steel High Speed Solid-liquid Separating Flat Sediment Centrifuge

1. Adoption of flatbed structure and liquid damping vibration reduction technology. The use of flatbed structure makes a lower center of gravity, which enables the operation much more stable. The flatbed as a base also as an operating platform makes the operation more convenient; the liquid damping vibration reduction technology enables the centrifuge to achieve a better performance of vibration isolation and reduction. The use of four-point supporting structure, the large supporting distance, and no base installation, make it convenient to install and overhaul.
2. Free-standing swash plate fabric device.  With the absorption of the advanced technology abroad, and changing the traditional middle or lateral fabric modes, the evenness of charge feed and the operability improve obviously, and it can be connected to electronic control system to realize auto-control.
3. Air recoil and pneumatic auxiliary scraper. This technology effectively reduces the solids remained in the drum and effective resume the performance of the filter cloths.
4. Nitrogen protection. Apply nitrogen to detect the oxygen amount contained in the machine online ensuring the safe operation.
5. Large folder type structure and on-line washing device. As GMP standards required, the upper lid of the centrifuge is designed to be a larger folder type structure, which makes the overhaul and the filter cloths' installation more convenient. Inside the centrifuge chamber a cleaning device is installed, as the technological requirements need to do on-line cleaning to the internal centrifuge when it is in operation or preparation, which can effectively eliminate the contamination among production batches.
6. User-friendly. No base structure, a broad platform, light folder type device, auto on-line cleaning device, explosion-proof light design, observation mirror and mirror-cleaning device, all kinds of warning signs and marks, which make the operation and maintenance simpler and more convenient. The whole design is full of the user-friendly ideas.
7. Security device. The idea of "security is first" is manifested in strength calculation, service life checking, and the design of security device. A series of mechanical and electrical interlock protection devices are applied in the system, such as over vibration protection, overflow protection, temperature control protection, feed layer control, scraper travel protection, lid-opening protection and etc., ensuring security in operation.
8. Auto human-computer interface control. The application of PLC, touch screen, frequency converter control, dynamic braking, pneumatic or hydraulic system, which enables the machine to design its working process according to the technological requirements, and to automatically operate as the program sets. Adopting advanced program, easier modification of program, more humanized interface, remote control, unmanned operation in work field, all satisfy the requirements of modern mass production for machinery. The designed self-diagnosis system for machinery failures makes it more quickly to solve the problems in operation.
9. Pneumatic mode. The automation action components adopt pneumatic system, which is clean and sanitary, and effectively avoids the pollution of leaking oil to the feed materials, satisfying the cleanliness requirements in pharmaceutical industry, food industry and fine chemistry.
10. Surface treatment technology. The processing techniques such as polishing, scrubbing, acid pickling, passivation to workpieces' surface, and corresponding methods to process welds, bores, screw threads, fastening structure, guarantee the surface meeting the requirements of GMP standards.
    
    
    
    
    
    
    
    Our company supplies different kinds of products of high quality at favorable prices. We stick to the beliefs of "quality first, service first, continuous improvement and innovation to satisfy our customers" and strive for the goal of "zero defect, zero complaints" because we believe only best quality and best service can make a long road . With us our customers can always be sure of the guaranteed good quality and excellent service. We're pleased to get your Inquiry and we will response as soon as possible.  

    Business Type:	trading Company
    Business Range	Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing and etc.
    Main Products:	Stainless Steel Tank, Rock Wool, centrifuge
    Management System Certification	ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
    Main Markets:	North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East and etc.
    Average Lead Time:	Peak season lead time: within 15 workday Off season lead time: within 15 workday

Stainless Steel High Speed Solid-liquid Separating Flat Sediment Centrifuge

1. Adoption of flatbed structure and liquid damping vibration reduction technology. The use of flatbed structure makes a lower center of gravity, which enables the operation much more stable. The flatbed as a base also as an operating platform makes the operation more convenient; the liquid damping vibration reduction technology enables the centrifuge to achieve a better performance of vibration isolation and reduction. The use of four-point supporting structure, the large supporting distance, and no base installation, make it convenient to install and overhaul.
2. Free-standing swash plate fabric device.  With the absorption of the advanced technology abroad, and changing the traditional middle or lateral fabric modes, the evenness of charge feed and the operability improve obviously, and it can be connected to electronic control system to realize auto-control.
3. Air recoil and pneumatic auxiliary scraper. This technology effectively reduces the solids remained in the drum and effective resume the performance of the filter cloths.
4. Nitrogen protection. Apply nitrogen to detect the oxygen amount contained in the machine online ensuring the safe operation.
5. Large folder type structure and on-line washing device. As GMP standards required, the upper lid of the centrifuge is designed to be a larger folder type structure, which makes the overhaul and the filter cloths' installation more convenient. Inside the centrifuge chamber a cleaning device is installed, as the technological requirements need to do on-line cleaning to the internal centrifuge when it is in operation or preparation, which can effectively eliminate the contamination among production batches.
6. User-friendly. No base structure, a broad platform, light folder type device, auto on-line cleaning device, explosion-proof light design, observation mirror and mirror-cleaning device, all kinds of warning signs and marks, which make the operation and maintenance simpler and more convenient. The whole design is full of the user-friendly ideas.
7. Security device. The idea of "security is first" is manifested in strength calculation, service life checking, and the design of security device. A series of mechanical and electrical interlock protection devices are applied in the system, such as over vibration protection, overflow protection, temperature control protection, feed layer control, scraper travel protection, lid-opening protection and etc., ensuring security in operation.
8. Auto human-computer interface control. The application of PLC, touch screen, frequency converter control, dynamic braking, pneumatic or hydraulic system, which enables the machine to design its working process according to the technological requirements, and to automatically operate as the program sets. Adopting advanced program, easier modification of program, more humanized interface, remote control, unmanned operation in work field, all satisfy the requirements of modern mass production for machinery. The designed self-diagnosis system for machinery failures makes it more quickly to solve the problems in operation.
9. Pneumatic mode. The automation action components adopt pneumatic system, which is clean and sanitary, and effectively avoids the pollution of leaking oil to the feed materials, satisfying the cleanliness requirements in pharmaceutical industry, food industry and fine chemistry.
10. Surface treatment technology. The processing techniques such as polishing, scrubbing, acid pickling, passivation to workpieces' surface, and corresponding methods to process welds, bores, screw threads, fastening structure, guarantee the surface meeting the requirements of GMP standards.
    
    
    
    
    
    
    
    Our company supplies different kinds of products of high quality at favorable prices. We stick to the beliefs of "quality first, service first, continuous improvement and innovation to satisfy our customers" and strive for the goal of "zero defect, zero complaints" because we believe only best quality and best service can make a long road . With us our customers can always be sure of the guaranteed good quality and excellent service. We're pleased to get your Inquiry and we will response as soon as possible.  

    Business Type:	trading Company
    Business Range	Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing and etc.
    Main Products:	Stainless Steel Tank, Rock Wool, centrifuge
    Management System Certification	ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
    Main Markets:	North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East and etc.
    Average Lead Time:	Peak season lead time: within 15 workday Off season lead time: within 15 workday

As a world`s leading designer and manufacturer of Laser system, CNI fully understood your actual demands of Laser Measurement and analytical capability, designed several laser measurement and safety protection instruments including IR Laser viewing card,
Laser Power Meter and laser goggles etc. 

IR laser viewing card is used to display Infrared Laser spot. CNI infrared laser display card is convenient for observe 700nm to 1600nm laser spot, which with features of high brightness, high contrast image with edge-to-edge sharpness.

Laser power meter is used to measure laser power and power stability. CNI designed several laser power measurement instruments with the features of accuracy testing, easy operation, etc. We provide mainly two types of laser power meter including thermopile laser power meter and photo electric laser power meter. They are widely used in the research, teaching, medical science, industry and other fields. Besides, The power can not go beyond the range of the power meter when using it. 

Thermopile Laser Power Meter

Photoelectric Laser Power Meter

Laser Goggles with beautiful shape, comfortable fit, high definition, extrusion deformation prevention material, are able to protect human eyes from the laser radiation damage from 200-1100nm.

Laser Measurement & Safety

Laser Measurement,Laser Safety,Laser Slope Measurement,Laser Distance Measurement

Changchun New Industries Optoelectronics Technology Co., Ltd. , http://www.lasersciences.com