Gravel Hammer Crusher, Aggregate Crusher for Sale

Introduction of hammer crusher


It is widely used in the industries of mining, building materials, chemical industry, metallurgies and fodder.
The Hammer Crusher is applicable for secondary and fine crushing of materials with middle or middle
Minus hardness such as barite, limestone, terrazzo, silicasandstone, coal, coke, gypsum,
Aluminum sulfate, slag, etc.



Features:

1.High quality chrome hammer, abrasion resistance achieving the advanced level in country;
2.Specially designing tooth impact plate;
3.Adjustable discharge open;
4.Low power consumption unit;
5.Big crushing ratio
6.Very long operation life
7 Simple structure, reliable operation
8.Easy maintenance, low operation cost
9.Good operating safety, lower energy cost
10.High economic efficiency, low cost, fast recovery



Working Principle:

Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: Upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.


Technical parameters:
FAQ:
1.What are advantages of your hammer crusher?

-The main advantage of our limestone hammer crusher over other kinds of mills is that you can grind a friable or crystalline material to 3mm average particle size and classify in a very narrow particle size range at the same time.There are no moving parts to wear out or generate heat in our mill and no screens to plug or be punctured.

2.Can you guarantee the quality of your hammer crusher?

---We have passed CE&ISO9001:2008, and our limestone hammer crusher have been exported to Eastern Europe, Middle East, Africa, South Asia, Southeast Asia, Oceania, America, etc.

 

R24.5 Radial Truck Bus Tyres

Passager Car Tire,PCR Tires,Radial Tire

Passager Car Tyres,Radial Truck Bus Tyres Co.,Ltd , http://www.nsbustyres.com