A few days ago, FAW-Volkswagen Automotive Co., Ltd. and Shanghai Volkswagen Automotive Co., Ltd. filed a recall plan with the AQSIQ in accordance with the requirements of the Regulations on the Management of Defective Automobile Product Recalls. It was decided to recall the following vehicles from the date of the following: a total of 4415 vehicles:
(1) A total of 4,281 new Baolai, Sagitar and golf cars produced by FAW-Volkswagen Automotive Co., Ltd. from July 5, 2013 to February 14, 2014;
(II) Some of the Touran and Tiguan vehicles produced by Shanghai Volkswagen Automotive Co., Ltd. from July 24, 2013 to October 5, 2013, totaling 134 vehicles.
Due to manufacturing problems of component suppliers, the driver's side main airbag module of some vehicles within this recall may not work properly. When a vehicle collides, the driver's side main airbag may not be fully deployed, posing a safety hazard. FAW-Volkswagen Automotive Co., Ltd. and Shanghai Volkswagen Automotive Co., Ltd. will replace the driver's side main airbag module for vehicles within the recall range to eliminate safety hazards.
FAW-Volkswagen Automotive Co., Ltd. and Shanghai Volkswagen Automotive Co., Ltd. will contact the users within the scope of the recall through special dealers to arrange free maintenance. Users can call the customer hotline 400-817-1888 (FAW-Volkswagen Automotive Co., Ltd.), 400-820-1111 (Shanghai Volkswagen Automotive Co., Ltd.) to learn more about the recall. Owners can also visit the AQSIQ website (), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the AQSIQ Defective Product Management Center hotline to reflect problems during the implementation of the recall or submit defects.
This equipment takes the
power from chassis engine,with stable and environmental performance;It adopts
rotary paddle switch and CCD camera in the inner lifting double-hopper,which
can monitor and alarm the level of aggregates in the hopper to improve the
bearing capacity,stability and reliability.It can realize operation in
height-limit condition,such as bridges and culverts.It adopts camber chip
distributing device to improve the evenness.It uses stable dedicated controller
to control the whole electric system,rear high-definition infrared cameras
monitor the whole operation,which improve the working environment and
efficiency.
HGY5317TFC Chip Spreader with asphalt binder is specially designed for asphalt mixing and spreading purposes in road and bridge maintenance projects. Developed from KT0608 and KT0610, this new equipment has something that the previous models fail to offer: it is endowed with stronger processing capability for the tank volume is increased to 8m³ and the volume of hopper grows to 14m³. The bitumen spreading machine is capable of spraying roughly aggregate of 8㎡ without lifting the hopper, which allows the equipment to work in low-height conditions.
HGY5317TFC chip spreading machinery drives stably, sprays material uniformly, and is affordable. A powerful mixing device is available to ensure the rubberized asphalt is not easy to get precipitated or segregated.
Technical Parameters
Model: HGY5317TFC
Chassis model: HOMO ZZ3317N4667E1 from CNHTC
Emission standards: Euro V
Chassis motor power: 276kW/380hp
Asphalt spray volume: 0.2-3.0kg/㎡
Aggregate spray volume: 2-22L/㎡
Asphalt heating speed: 20℃/h
Optimum construction speed: 3-6km/h
Chip size: 3-30mm
Tank volume: 8500L
Spray width: 4200mm
Hopper volume: 14m³
Material: modified bitumen, hot asphalt, rubberized asphalt, and emulsified asphalt
Total weight: 31000kg
Dimension: 11950×2500×3860mm (L×W×H)
Main Features
1. The asphalt sprayer adopts a special chassis which is in conformity with the Euro V standards, featuring strong carrying capability, low oil consumption, and easy operation
2. The patented hydraulic servo technology provides powerful driving force for the system
3. The bitumen spreading machine employs intelligent control system, radar speed tester, monitor, and both automatic and manual operation system. Only one driver is needed to accomplish the distribution job
4. Pipes for carrying bitumen are coated with heat transfer oil to ensure that all of the machine parts run smoothly and don't have to be cleaned
5. The 3 anti-collision foldable sprinkler heads are of high precision and uniformity
6. The imported pump for high-viscosity asphalt meets various working conditions
7. A unique aggregate feeding and distribution system ensures the materials are sprayed uniformly, consecutively and stably
8. Different spray nozzles are controlled independently and can work jointly with each other freely
9. HD camera is equipped at back of the road maintenance vehicle for effective monitor and control
10. The patented bitumen tank with large volume can be heated in a short time and works to maintain the temperature of the materials. Stability of the bitumen is largely improved by the mixing device
Lift Type Synchronous Chip Sealer
Lift Type Synchronous Chip Sealer,Synchronous Asphalt Chip,Computerized Synchronous Chip Sealer,Road Synchronous Chip Sealer
Henan Gaoyuan Road Maintenance Equipment Co., Ltd. , https://www.sgroadmachinary.com