DIN7504-K Dia 3.5 to 6.3
#6, #8, #10, #12, #14
Material: SUS410 hardend stainless steel
Head Style: Hex with collar
Drive Style: Socket
Standard: DIN6928, DIN7504N, DIN7504k
Diameter: 2.9mm, 3.5mm, 4.2mm, 4.8mm, 5.5mm, 6.3mm
Length: 6.5mm to 75mm
Screw length: 3/4 to 4 inch
More options on DIN7504 self drilling screws,
Carbon Steel, Stainless Steel
DIN7504-K Stainless Steel Self Drilling Screws
DIN7504-K Dia 3.5 to 6.3
#6, #8, #10, #12, #14
Material: SUS410 hardend stainless steel
Head Style: Hex with collar
Drive Style: Socket
Standard: DIN6928, DIN7504N, DIN7504k
Diameter: 2.9mm, 3.5mm, 4.2mm, 4.8mm, 5.5mm, 6.3mm
Length: 6.5mm to 75mm
Screw length: 3/4 to 4 inch
More options on DIN7504 self drilling screws,
Carbon Steel, Stainless Steel
Drawn Cup Needle Roller Bearings have a deep drawn, thin-walled outer ring. Drawn cup Needle Roller Bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially.
The drawn cup of hardened steel and the needle roller and cage assembly of these bearÂings form a nonÂ-separable unit.
Bearing features
Low cross section
In applications where less space is available, drawn cup needle Roller Bearings enable downsizing.
High load carrying capacity and stiffness
Due to their large number of rollers, drawn cup needle roller bearings have a high load carrying capacity and stiffness.
Good running properties
Drawn Cup Needle Roller Bearings
Drawn Cup Needle Roller Bearings,Drawn Cup Roller Bearings,One Direction Needle Roller Bearings,Drawn Cup Caged Needle Roller
Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com