Self drilling screws have a drilling tek point. Pan heads are slightly rounded with short vertical sides. Pin-in Torx / Star is a tamper proof drive that requires a special driver to install. Â
These self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.
The higher the TEK number the larger the drilling point to pierce heavier gauge metals. Different stainless mode for different applications.
Specification
Â
| Type | Self Drilling Screw / Tek Screw |
| Grade | SUS304, 316(marine grade), 410(hardend), 18-8 |
| Finish | Plain or Passivated |
| Head Type | Pan Head |
| Drive Type | Pin-in Torx / Star |
| Diameter | #6 ~ 1/4", 3.5 ~ 6.3mm |
| Length | 1/4" ~ 10", 6.5 ~ 250mm |
| Standard | DIN, ANSI, JIS, GB |
| Stock | Unavailable |
Contact
If you're insterested in our stainless steel pin-in torx pan head self-drilling security screw, please do not hesitate to send us email or call us at +8615867456779(Mobile) directly.
For stock, we suggest you double check from us before placing order, thank you! 304/316/410 Stainless Steel Pan Head Pin-in Torx Tamper Resistant Self Drilling Screws
Self drilling screws have a drilling tek point. Pan heads are slightly rounded with short vertical sides. Pin-in Torx / Star is a tamper proof drive that requires a special driver to install. Â
These self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.
The higher the TEK number the larger the drilling point to pierce heavier gauge metals. Different stainless mode for different applications.
Specification
Â
| Type | Self Drilling Screw / Tek Screw |
| Grade | SUS304, 316(marine grade), 410(hardend), 18-8 |
| Finish | Plain or Passivated |
| Head Type | Pan Head |
| Drive Type | Pin-in Torx / Star |
| Diameter | #6 ~ 1/4", 3.5 ~ 6.3mm |
| Length | 1/4" ~ 10", 6.5 ~ 250mm |
| Standard | DIN, ANSI, JIS, GB |
| Stock | Unavailable |
Contact
If you're insterested in our stainless steel pin-in torx pan head self-drilling security screw, please do not hesitate to send us email or call us at +8615867456779(Mobile) directly.
For stock, we suggest you double check from us before placing order, thank you!
Steel-drawer
Model:XY-P80 XY-p120
Specification:
The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.
Advantages:
1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.
2.The automatic lifting device is adopted to reduce the labor intensity of workers;
3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.
4.Using manual automatic exchange of work,flexible choice.
Tyre Steel Remover ,Tyre Horizontal Steel Drawer,Tyre Steel Lateral Drawer
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl