The all-cylinder linerless diesel engine is a new type of diesel diesel engine newly developed by Jiangling Company (natural intake model JX493Q3-1 and turbocharged model JX493ZQ-12). At present, only a few diesel engine plants in China can produce. In order to enable everyone to better use and maintain the cylinderless diesel engine and extend its service life, the following briefly introduces the characteristics of the cylinderless diesel engine and its use and maintenance methods.
First, the maintenance method of the cylinderless diesel engine: In the maintenance, although the full non-cylinder diesel engine and a cylinder liner diesel engine most of the parts can be universal, but because of the design difference between the cylinderless diesel engine and cylinder liner diesel engine, so when maintenance It must be noted that the piston rings and the cylinder block of a cylinder liner diesel engine are not common to a cylinder block diesel engine.
Second, the use of non-cylinder diesel engine: In use, the user's maintenance is an important factor affecting the life of the cylinderless diesel engine. Similar to the general diesel engine, the initial running-in is very important and must be used and maintained strictly in accordance with the requirements of the operating instructions. After the running-in is completed, although the diesel engine can operate at full speed and high speed, it is also necessary to periodically replace the oil, oil filter, air filter, and diesel filter that meet the requirements.
Third, when the cylinderless diesel engine is in normal use, its service life is the same as that of a liner diesel engine. However, if it is used improperly, it can easily cause problems such as early wear of the cylinder bore and burning of oil. Since the cylinderless diesel engine cannot be repaired directly by replacing the four kits like the cylinder diesel engine, the following method can be used for maintenance:
1) directly replace the cylinder
2) Cylinder grinding, group optional maintenance special piston
3) Cylinder grinding, adding cylinder liner, so that it becomes a cylinder liner If the cylinder bore wear is small and the cylinder bore wear is small, the commonly used method is to expand and honing the cylinder bore, and re-select the use of For the maintenance of the increase of the outer diameter of the piston and piston rings, etc., must ensure that the gap between the piston and the cylinder hole between 0.025 ~ 0.045mm.
Fourth, the characteristics of the cylinderless diesel engine:
Compared with cylinder-cylinder diesel engines, cylinderless diesel engines have mainly improved as follows:
1) Cancel the cylinder liner. The piston ring and piston directly act on the cylinder bore.
2) Trace elements are added to the material of the cylinder block to increase the strength and wear resistance of the cylinder and adapt it to the working environment of the cylinderless diesel engine.
3) The use of a cylindrical chrome-plated piston ring forms a good friction pair with the cylinder bore wall of the cylinder block.
4) Raise the requirements for the roughness of the cylinder bore so that it has lubrication and wear resistance.
5) Because there is no need to install a cylinder liner, the cylinder bore has no stop. Compared with a cylinder liner diesel engine, due to the abolition of the cylinder liner, the wall thickness of the cylinder bore is increased, the deformation of the cylinder bore can be reduced, and the sealability of the piston ring is ultimately improved, thereby reducing the amount of helium gas. At the same time, the cylinder sleeve is reduced, so that the heat generated by the diesel engine can be directly transmitted to the cooling water of the diesel engine through the contact between the piston ring and the cylinder body, which improves the heat dissipation capability and optimizes the working conditions of the diesel engine.
Extensive reading:
Ford transit transited, started in Europe. As the most popular commercial model of Ford, transit Shunshun has been selected as the world’s top 500 and has been selling for more than 45 years. With its sophisticated technology and reliable quality, Transit has sold more than 6 million units and has achieved the largest accumulated international sales. Light passenger brand. As a company that earlier introduced foreign investment in Jiangxi, Jiangling Motors quickly grew with the support of its strategic partner, Ford. In 1997, JMC/Ford successfully launched China's first truly integrated Chinese-foreign vehicle, the Transit Light Passenger, and quickly became the leading brand in the domestic high-end light passenger market.
Shackle,also kown as a gyve,is a U-shape or bow-shape piece of metal(mostly forged) secured with a clevis pin or bolt across the opening.It has a great demand especially from construction industry business.
WinnerLifting,as a well-known Rigging Hardware supplier also knows how to get you the right thing with right offer.
You can source standard US type Dee shackle or bow shackle here,or the cheaper option,commercial galvanized shackles.
Tell me your specific requirement,WinnerLifting shall take care of the rest.
European Type Shackles,Anchor Shackle,Stainless Steel Shackle,D Shackle,Bow Shackle,Snap Shackle,Shackle Buckle,Stainless Steel Shackle,Anchor Shackle,Chain Shackle
WINNERLIFTING SAFETY EQUIPMENT CO.,LTD. , https://www.winnerlifting.com