Â
We are the manufacturer for side channel blowers (also called regenerative blower, ring/air blower, air pump, vacuum pump), located in Dongguan, Guangdong, China, which is near Shenzhen and Guangzhou port. Our company is specialized in producing the high pressure, low noise, energy-saving and efficiency side channel blowers.
The air flow capabilities of our blowers range from 55 to 2480 m3/h, the max vacuum pressure could reach -500mbar, and the max compress pressure could reach 600mbar, the power ranges from 0.25KW to 25KW. We only produce side channel blowers
| Model | Weight | Frequency | Voltage | Current | Rated Output | Noise | Max Airglow |
|  | KG | Hz | V | A | KW | DB(A) | m³/h |
| 2LG 410-7AH16 | 15 | 50 | 200-240 â–³/345-415Y |
4.2 â–³/2.4Y | 0.85 | 63 | 145 |
| 60 | 220-275 â–³/380-480Y |
4.0â–³/2.3Y | 0.95 | 64 | 175 |
1. Aquaculture (fish and prawn pond aeration)
2. Waste water treatment, sewage treatment system.
3. Pneumatic conveying systems.
4. Lifting and holding of parts by vacuum.
5. Packing machines.
6. Filling of bags/bottles/hoppers.
7. Soil remediation
8. Food processing.
9. Laser printers
10. Dental suction equipment.
11. Paper processing.
12. Gas analysis.
Product Features:
1.Stable air flow and less pressure variation
2.Clean air not with oil moist
3.Construction simple and easy maintenance
4.Bearing are all lubricated bt oil moist
5.Lower energy consumption
6.Lower Noise and libration.
7.made of die-cast aluminum ADC12.
8.LIONGOAL Blower's Bearing: continuously works 130000 hours without any lubricating and maintenance.
9.Die-cast aluminum alloy housing.
10.Both 50Hz and 60Hz available.
11.Dual-usage: Compressor and Vacuum (suction and blow).
12Electronic motor with IP54 protection and Insulation class F.
13.No oily odors.
14Â Maintenance-free.
15.Easy installation.
Our service:
 Marketing Service
100% tested CE certified blowers.Special customized blowers(ATEX blower,belt-driven blower)Â for special industry.Like gas transportation,Medical industry...Professional advice for model selection and further market development.
After-sale Service
Experienced suggestion for blower installation and use.
12 months warranty.Long-term technical support.
Brief introduction and editing of dust remover
Bag Filter [1] is a dry dust filter. After a period of use of filter material, due to the effect of sieve filtration, collision, retention, diffusion, static electricity and so on, the surface area of the filter bag is gathered in a layer of dust. This layer of dust is called the initial layer. In the course of the movement, the primary layer becomes the main filter layer of the filter material, and the larger filter material of the net hole can also get higher filtration depending on the effect of the initial layer. Efficiency. With the accumulation of dust on the surface of the filter material, the efficiency and resistance of the Dust Collector all increase correspondingly. When the pressure difference on both sides of the filter material is very large, some fine particles that have been attached to the filter material will be squeezed past to reduce the efficiency of the dust collector. In addition, the high resistance of the dust collector will reduce the air volume of the dust removal system significantly. Therefore, when the resistance of the dust collector reaches a certain value, the ash should be cleaned in time. When cleaning, the primary layer should not be destroyed, so that the efficiency will be reduced.
Flat Bag Dust Collector,Portable Dust Collector,Washable Dust Collector,Mobile Welding Smoke Collector
Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com