Chassis killer is everywhere, do you dare to "clash?"

Whether it is a novice driver or an old driver, there is something in the layman that everyone will encounter. This is the ubiquitous chassis killer on the road. Often novice drivers do not know how to deal with a broken chassis, while older drivers are too reckless to care for the bottom. This will in any case cause some damage to the chassis or other components!

Today, let's talk to everyone about the ubiquitous chassis killer on the road. Are you still "melee"?

Killer 1: Speed ​​bump

Consumable parts: lower front bumper, exhaust pipe

The design of the speed reduction belt in China has no uniform standard. The shapes are different and the height is not the same. The main reason is to let the vehicle slow down. Some owners have no deceleration with the deceleration belt. Some speed bumps will have a high height, so It is easy to scrape the bottom.

Killer 2: Top and bottom

Consumable parts: front bumper, side skirt

I believe that a small number of people know that if the chassis of the car is not very high, it is easy to support the bottom when passing the top of the slope. When the car is kicked, the car will be stuck there. When downhill, we must pay attention to slow down, because the front insurance The bar easily touches the ground.

Killer 3: Ma Luzi

Consumable parts: tire wall, suspension, front bumper

If the height of the road is not well grasped, the front bumper will be most likely to be injured. The wrong way will cause damage to the tire wall, resulting in problems such as bulging. If it is necessary, we must make the underside of the tire face the road as far as possible. Tooth, or to find bricks, preferably not sideways.

Killer 4: Foreign bodies such as stones

Consumable parts: oil pan, exhaust pipe

If you don’t concentrate on driving, the foreign objects on the road are like hidden objects, which make you hard to prevent and let you do a lot of damage. For example, if the stones and bricks are in large pieces, it is easy to cause oil leakage in the chassis, so pay attention when driving. The situation of the road surface, timely detection of foreign objects to avoid in advance.

Killer 5: Muddy Section

Consumable parts: suspension, front bumper

This kind of road is even more careful with SUVs. The softer road surface can easily be rolled into low terrain on both sides of the middle. If you follow the track, you can easily hurt the chassis and the bumper with stones. The safest way to this kind of road is to walk away. As long as the sideways angle is small, there is no problem.

Killer 6: Depressed Road

Consumable parts: suspension, front bumper, tire

Some asphalt roads or roads where large trucks often walk will most likely form pits and dents. It is not obvious from a distance. It is too late to avoid the discovery. If the speed is fast, it can fly. It is unfamiliar. The road should slow down at low speeds and observe the road conditions.

Killer 7: manhole cover

Consumables: Tire, Bracketed

The manhole cover is a magical thing. Some of the manholes will be convex and some are not. The sewers are large and deep. When they are accidentally trapped, they cannot be opened, and the envelopment is basically scrapped.

to sum up

Travel outside these chassis killer everywhere, if you do not go hard and hard, use the right way to solve, or ruin the car regret it is too late!


Working principle

Vibrating Feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration,the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.



Application

GZV series Electromagnetic Tiny Vibrating Feeder is a kind of linear direction feeding equipment. It features smooth vibrating, reliable operation, long service life and being suitable for feeding.


GZV series Electromagnetic Tiny Vibrating Feeders are widely used in mining, building material, food, chemical and other industries in the crushing and screening plants. In the production line, it can deliver materials to crusher evenly and continuously and at the same time, it can also screen materials roughly.


Vibrating feeder can be used in these areas such as metallurgical industry, coal mining industry, mining-selecting, building, chemical and grinding industry, etc.


GZV Electromagnetic Vibrating Feeder

Gzv Electromagnetic Vibrating Feeder

Gzv Electromagnetic Vibrating Feeder,Durable Electromagnetic Vibration Feeder,Auto Electromagnetic Vibrating Feeder,Electromagnetic Vibrating Feeder

XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl